| Quantity: | |
|---|---|
| Material | Carbon, Alloy and Stainless Steel |
|---|---|
| Product Type | Blind Flange |
| Size | 1/2'' to 24'', Customized up to 48'' |
| Thickness | Schedule 10(S) to SCH 160 |
| Pressure Ratings: | Class 150 to 2500 |
| Grade | 304 Stainless Steel |
| Face Type: | RF,RTJ |
Purpose:
Design:
Material:
Applications:
Installation:
Material: Carbon, Alloy and Stainless Steel
Standards: ASTM A105, ASTM A182
Sizes: 1/2'' to 24'', Customized up to 48''
Thickness: Schedule 10(S) to SCH 160
Pressure Ratings: Class 150 to 2500
Face Type: RF, RTJ
.
The main function of a blind flange is to completely isolate the production medium. This prevents the shut-off valve from closing tightly, which can impact production and potentially lead to accidents.
Blind flanges should be installed in locations that require isolation, such as at equipment nozzles, between the front and rear of shut-off valves, or between two flanges. It is often recommended to use a figure 8 blind flange in these situations. For single-use applications like pressing and purging, a standard round blind flange is typically used.
There are several types of sealing surfaces, including flat, convex, concave, grooved surfaces, and ring joint surfaces.
Blind Flange material usually required in carbon steel, stainless steel, alloy steel, copper, aluminum and etc.
Carbon steel blind flange: ASTM A105
Alloy steel: ASTM A182 F5, F9, F11, F22, F91
Stainless steel blind flange: ASTM A182 F304/L, F316/L
ASME B16.5
BS 3293
DIN 86029
General use OD range: 1/2'', 2'', 3'', 4'', 6'', 8'', 10'', 12'', to 24".
Special made OD: Up to 60".
Class range: Class 150, Class 300, 400, 600, 900, 1500, 2500
Flange face type: RF (Raised Face), RTJ (Ring Type Joint)
There are generally four types of manufacturing processes: forging, casting, cutting from medium plates, and casting combined with forging. Among these, forging products have the highest price, followed by medium plate cutting. Casting combined with forging is less expensive, while casting is the least favorable process.
In terms of quality, forging and medium plate cutting produce the best results, while casting combined with forging is of slightly lower quality.
The shape of the casting flange blank is precise, requiring minimal processing capacity, making it cost-effective. However, it may have casting defects such as air holes, cracks, and inclusions. Additionally, the internal flow characteristics of the casting are poor, and if it involves cutting, the flow characteristics are even worse.
Forged blind flanges generally have a lower carbon content compared to cast flanges, making them less prone to rust. They also have a better streamlined shape, a denser structure, and superior mechanical properties compared to cast flanges.
However, if the forging process is not performed correctly, it can result in large or uneven grain structures and the potential for hardening cracks. Additionally, the cost of forged flanges is higher than that of cast flanges.
Overall, forged flanges can withstand greater shear and tensile forces than their cast counterparts.
| Elbow | Tee | Reducer | Cross | End Cap | Stub End | Adapter |
| Material | Stainless Steel:SS304, SS316, SS304L, SS316L, SS321,1.4401, 1.4403 Duplex Stainless Steel:A182 Gr F51 B16.5,A815 Gr WPS31803 (UNS31803) | |||||
| Standard | ANSI/ASME,ISO, DIN,BS,JIS,GB,GOST | |||||
| Wall thickness | SCH5S to SCH160 | |||||
| Size | DN15-DN1200 | DN15-DN1200 | 20x15-1200x1000 | DN15-DN1200 | DN15-DN1200 | DN15-DN600 |
| Pressure Rating | Class 150 to 2500 | |||||
| Temperature Range | -196°C to 600°C | |||||
| Connection | Weld,Threaded | |||||
| Surface treatment | Pickling,annealing,polished,sand rolling,sand blasting,etc | |||||
| Applications | Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc | |||||
| Standards | ASME/ANSI B16.9 (LR), B16.28(SR), JIS B 2311/2220, DIN2605/2616/2615 |
| Type | Cross, elbow, tee, cap, stud end, reducer, cross etc... |
| Materials | Stainless steel: ASTM A403-WP304, WP304L, WP304/304L, WP304H, WP316, WP316L, WP316/316L, WP321, WP321H, WP347, WP347H Super stainless steel: ASTM 904L, B366-N08904, A403-WP317, 317L, 254SMO(UNS S31254) Duplex and super duplex steel: ASTM A815-S31803, S32205, S32750, S32760, 2205 Low temperature steel: ASTM A420-WPL6, WPL3 Alloy steel: ASTM A234-WP11, WP22, WP91 Pipeline steel: API X42, X52, X60, X65, X70 Carbon steel: ASTM A234-WPB, WPC Nickel alloy incone l825, Incolloy800HT, Monel400, Al-Mi Metal |
| OD | Seamless products DN15 (1/2")/DN600 (32") Welded products DN450 (1/2")/DN3000 (120") |
| Wall thickness | SCH 5S- SCH 160XXS |
| Applications | Low and middle pressure fluid pipeline, boiler, petroleum and natural gas industry, drilling, chemical industry, electric industry, shipbuilding, fertilizer equipment and pipeline, structure, petrochemical, pharmaceutical industry |
| Packaging | Wooden case/pallets or by customer requirement |
| Delivery lead-time | 10 to 45 days |
Tianjin Hongxin International Trade Co., Ltd. is a trading company which is an attached sales limited of Bazhou Huaxin Metal Product Co., Ltd. The factory was founded in 2004, covers an area of 30, 000 square meters, construction area of 7,500 square meters, more than 200 employees.
We are specialized in supplying steel sheets, steel pipes, precision pipe, ERW steel pipes, galvanized steel pipes and so on. All products are strictly in accordance with IS09001:2000 quality system production. Advanced equipment, reliable quality.
With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in Photovoltaic support, natural gas, greenhouse building, agriculture, lighting industry and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Why choose us?
. 20 Years of Experience in Steel Manufacturing
. All Customizable to Fit Your Needs
. Large Stock for Fast Delivery
. High Standards of Quality Control
. Comprehensive After-Sales Service Guarantee
Are you a trading company or factory?
